ENVIROBOT® M4000

With a surface contaminant removal  greather than conventional manual guns, the ENVIROBOT® M4000 improves coating adhesion and extends coating life, thereby increasing in-water efficiency for your customers. And because the ENVIROBOT® M4000 works faster, the return to service is faster, improving overall profitability for you and your customer.

PRICE COMPARISON

ENVIROBOT® M4000 vs MANUAL GUNS

" OVER $155,000 OPERATING COSTS SAVINGS PER 20,000 m² "

The use of ENVIROBOT® M4000 will provide you significant operating cost savings. Excluding any equipment depreciation expense, the ENVIROBOT® M4000 system can save you approximately $157,651 per 20,000 square meters of surface stripped.

FULLY EQUIPPED CONTAINER

The ENVIROBOT® comes with a fully equipped container that contains the components that control the robot on the steel surface and vacuums the paint and water after coating has been removed by the robot. The wastewater with paint residue and all particulates are sent to the holding tank.

REDUCES MAN POWER

SAFE,RELIABLE AND EFFICIENT

COMPLETE EFFLUENT CONTAINMENT

LOW OPERATION COST

PERFORMANCE COMPARISON

ENVIROBOT® M4000 vs GRIT BLASTING

The chart shows that, assuming an average surface of 20,000 square meters, the revolutionary ENVIROBOT® M4000 process requires significantly fewer resources, produces less waste and can be completed in half the time of a normal grit blasting job. Grit blasting is assumed to require a crew of 20 men, utilinzing grit at a rate of 50 kg/m². Robotic hydroblasting is assumed to employ two ENVIROBOT®  units, each requiring a crew of 3 people to operate.

STANDART HYDROBLASTING

BEFORE1

WJ1 10-20 m²/hour

The surface willl be free of all previously existing visible rust, coatings, mill scale, and foreign matter and have a matte metal finish.

BEFOREWJ22

WJ2 20-75 m²/hour

The surface will be cleaned to a matte finish with at least 95% of the surface area free of all previously existing visible residues.

BEFOREenviblaster_placa2

WJ3 20-75 m²/hour

The surface will be cleaned to a matte finish with at least two-thirds of the surface area free of all previously existing visible residues.

BEFOREULTRASWEEP4

ULTRASWEEP 75-100 m²/hour

The surface will have all loose rust. loose mill scale and loose coating uniformly removed.

TECHNICAL SPECIFICATION

DIMENSIONS: 182 x 70 x 56 cm (72x27x22 in)

CUTTING WIDTH: 38 cm (15″)

WEIGHT: 222 kg (490 lb)

SPEED: 0 to 30 cm (0 to 12 in) p/sec

MAX PRESSURE: 2 800 BAR (40 000 PSI)